 |
|
|
|
|
|
|
|
|
84" Filmaster dual turret winder
Completed: January 2003
- Strip to frame and paint
- New electrical system, PLC and touch screen
- New 3 HP AC Vector drive motors and controls
- Replace micro switches with proximity switches
- New pneumatic lines & cylinders
- New regulators and gauges
- Replace all high speed bearings
- Replace all idler bearings
- Replace mount hope rolls
- Idler roller spun and cleaned
- Geared at 350 feet per minute |
|
|
 |
|
|
|
|
|
|
|
|
|
|
74" Sano dual turret winder
Completed: December 2002
- Strip to frame and paint
- New electrical system, PLC and touch screen
- New 5 HP AC Vector drive motors and controls
- Replace micro switches with proximity switches
- New pneumatic lines & cylinders
- New regulators and gauges
- Replace all high speed bearings
- Replace all idler bearings
- Replace mount hope rolls
- Geared at 350 feet per minute |
|
|
 |
|
|
|
|
|
|
|
|
|
|
64" Bellmark logo press for two lanes
Completed: November 2002
Custom design
- Print width 14.25" per web on 2 webs
- Prints 1 color on each side or 2 colors on one side
- Ceramic anilox rolls & doctor blades
- Repeat range 18" to 64"
- Designed for maximum speed of 350 feet/minute
- Infeed nip with dancer
- Dryer, exhaust & air blowers |
|
|
 |
|
|
|
|
|
|
|
|
|
|
86" Wolverine 2 color press
Completed: August 2002
- Clean and assemble 2 color press
- Rework anilox rubber rolls
- Convert to electric drying
- Put machine in good working order
- Convert to AC vector motor and drive |
|
|
 |
|
|
|
|
|
|
|
|
|
|
30" Stanford Slitter Rewinder
Completed: May 2002
- Replace spindle drives
- Replace tracking roll drive
- Supply 30" nip with 2 HP AC vector drive
- Supply new slitter control panel with PLC
- Supply ultrasonic sensor to calculate roll diameter
- Re-gear machine for 1000 feet/min
- Replace phenolic drive gears on driven rollers
- Replace all bearings on the slitter
- Recover grooved rubber tracking rolls
- Strip clean and paint slitter |
|
|
 |
|
|
|
|
|
|
|
|
|
|
50" one color Wolverine Cub printing press
Completed: May 2002
- 50" face with impression roll
- 46" width print cylinder, 10D pitch
- New electrical system
- New 1.5 HP AC Vector drive
- Dancer assembly with belloframe cylinder
- Proximity switch cam and electrical interface
- Engraved steel anilox roll for solvent based inks
- Geared for 30 to 130 feet per minute |
|
|
 |
|
|
|
|
|
|
|
|
|
|
67" Kuhne Surface Winder
Completed: January 2002
- Rebuild machine to good running condition
- Convert to 6" core diameter shafts |
|
|
 |
|
|
|
|
|
|
|
|
